Geofoam Blocks
Stadium Savers EPS Geofoam blocks are precut to the configuration of the stadium seating risers and stadium seating design layout.
A standard block size is 48” x 96” by the riser height. If the riser height is 14”, the 48” x 96” x 14” piece can easily be carried by a single individual. Each piece is marked so that the installer can easily determine the intended location. For instance, the first layer is labeled “A” and the first block is “1”; therefore the A-1 block is the first block to go into the back of the auditorium. Likewise, block B-1 would be the first block (installed in the back of the auditorium) in the second layer, and so on.
Each 4 x 8 block is secured to the preceeding layer with three gripper plates, which are 4” x 4” galvanized plates that have teeth pointing up and down. The plate is pressed into the lower block and the succeeding upper block is pressed onto the gripper plate. The gripper plates keep the blocks from shifting. In a typical auditorium, a crew of three or four laborers can easily assemble a complete studio in less than one day.
